Top Cowl Removal And Installation; Exterior Care - Mercury 200 User Manual

2. Attach a water hose to the fitting. Turn on the water and flush
for 3 to 5 minutes.

Top Cowl Removal And Installation

REMOVAL
1. Pull out the front cowl latch.
2. Lift front of cowl to clear front latch and push toward the rear
to clear rear hooks.
3. Lift top cowl to remove.
INSTALLATION
1. Lower top cowl into position over engine.
2. Move the cowl toward the rear to align rear hooks. After rear
hooks have engaged, move cowl toward front and push down
front of cowl.
3. Push in latch to secure top cowl.

Exterior Care

Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
MAINTENANCE
59
29297
28431