Steering Link Rod Fasteners - Mercury 200 User Manual

OUTBOARD INSTALLATION
Tube Ref No.
2-4-C Marine
95
Lubricant with Teflon
2. Insert steering cable into tilt tube.
3. Torque nut to specification.
Description
Nut

Steering Link Rod Fasteners

IMPORTANT: The steering link rod that connects the steering
cables to the engine must be fastened using special washer head
bolt (P/N 10‑849838) and self‑locking nylon insert locknuts (P/N
11‑826709113). Never replace locknuts with common nuts
(non‑locking) as they will work loose/vibrate off freeing link rod to
disengage.
Description
89
Where Used
O-ring seal and entire
cable end
Nm lb. in.
47.5
Part No.
92-802859A1
3725
3727
lb. ft.
35