Connecting Via Activesync - Casio IT-800 Series Quick Start Manual

7.3.3 Connecting via ActiveSync

If debugging with the IT-800WM Device Emulator is carried out in Visual Studio 2008 or Visual
Studio 2005, or transmission/reception of a file with the Device Emulator is carried out,
ActiveSync must be used.
Setting ActiveSync
1. Start up ActiveSync and then navigate to File → Connection Settings ....
Figure 7.13
2. In Connection Settings screen, check in the Allow connections to one of the following
box and choose DMA in the pull-down menu. See Figure 7.14.
Figure 7.14
47