Protecting The Files On A Card; Deleting The Files Recorded On A Card; Formatting A Card; Writing Printing Data On A Card - Panasonic NV-MX500 Operating Instructions Manual

Table of Contents

Advertisement

≥For other notes concerning this item, see

Protecting the Files on a Card

(Lock Setting)
Precious files recorded on a Card can be locked (to prevent
accidental erasure). (Even if files are locked, the files will be
deleted when the Card is formatted.)
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE LOCK] >> [YES].
(26)
SHUTTER/IRIS/
VOL/JOG
(51)
≥The [FILE LOCK] Menu is displayed.
2
Select [PICTURE] or [TITLE].
FILE LOCK
640
640
640
640
PRESS MENU TO EXIT
3
Select the file to be locked, and press the [PUSH] Dial
(26)
.
≥The selected file is locked and the [
attached. Repeat this procedure to lock 2 or more.
≥Files recorded by Voice Recording Function is
automatically locked (to prevent accidental erasure).
≥Press the [PUSH] Dial
≥The SD Memory Card has a write protection switch. (
≥For other notes concerning this item, see

Deleting the Files Recorded on a Card

Using the Movie Camera, you can delete the files recorded
on a Card. After the file is deleted, it cannot be restored.
To Select and Delete Files
1
Slide the [TAPE/CARD/CARD MODE] Selector
[CARD MODE] until the type of data to be erased
indication appears.
CARD
TAPE
CARD MODE
(13)
2
Set [CARD FUNCTIONS] >> [ERASE CARD FILE] >>
[ERASE FILE BY SELECTION].
(26)
SHUTTER/IRIS/
VOL/JOG
(51)
≥To erase a title, select [ERASE TITLE BY SELECTION].
3
Select the file you wish to delete and press the [PUSH]
Dial
(26)
.
≥The frame around the selected file flashes.
≥To erase 2 files or more, repeat this step.
4
Press the [PHOTO SHOT] Button
PHOTO
SHOT
(25)
≥A verification message appears.
.
-47-
PUSH
640
1
640
] Indication 1 is
(26)
again to cancel.
.
-48-
(13)
PUSH
(25)
.
CARD Mode
5
Select [YES] and press the [PUSH] Dial
≥The selected file is deleted from the Card.
≥If [NO] is selected, the file selection is cancelled.
To Select and Delete All Files
1
Slide the [TAPE/CARD/CARD MODE] Selector
[CARD MODE] until the type of data to be erased
indication appears.
TAPE
2
Set [CARD FUNCTIONS] >> [ERASE CARD FILE] >>
[ERASE ALL FILES].
(26)
(51)
≥A verification message appears.
3
Select [YES] and press the [PUSH] Dial
≥All the files of the selected Card Mode ([PICTURE],
[MPEG4] or [VOICE]) are erased.
≥A locked file cannot be erased.
≥When you delete Voice File, be sure to cancel the Lock
setting before deleting.
≥Do not delete the Voice Files recorded with this Movie
Camera using other devices.
)
-48-

Formatting a Card

If a Card becomes unreadable by the Movie Camera,
formatting it may make it reusable. Formatting erases all the
data recorded on a Card.
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[CARD FORMAT] >> [YES].
(26)
to
(51)
≥Since a confirmation message appears, select [YES] and
formatting will be carried out.
≥When the formatting is completed, the screen becomes
white.
≥It may not be possible to use the Card which was formatted
using this Movie Camera on another unit. In this case,
format the Card on the unit which will be using the Card.
Take steps to ensure that valuable pictures are stored on
the personal computer, etc. as well before proceeding.
≥A Card formatted with an other equipment (like a Personal
Computer) might be unusable or it might take more time for
recording. We recommend that you use this equipment to
format it.

Writing Printing Data on a Card

(DPOF Setting)
DPOF Setting Printing data (DPOF Settings), such as the
number of images to be printed, can be written to the Card.
"DPOF" means Digital Print Order Format.
-37-
CARD
CARD MODE
(13)
SHUTTER/IRIS/
VOL/JOG
PUSH
SHUTTER/IRIS/
VOL/JOG
PUSH
CARD FORMAT
FORMAT WILL ERASE
ALL FILES
AND PRESET TITLES
NO
---
RETURN
YES
(26)
.
(13)
to
(26)
.

Advertisement

Table of Contents
loading

Table of Contents