Table of Contents
Advertisement
Part Names and Functions
Rear Panel
1 AC IN (12 V) Input Terminal
The supplied AC adapter connects here.
2 COM 1 Terminal (9-Pin D-Sub)
The EVI-D30/D31/G20/G21 or HSR-1/1P/2/2P can be
connected to here. The EVI-D30/D31/G20/G21
connects using VISCA cable, and the HSR-1/1P/2/2P
connects with RS-232C cable.
3 COM 2 Terminal (9-Pin D-Sub)
The EVI-D30/D31/G20/G21 or a modem can be
connected to here. The EVI-D30/D31/G20/G21
connects using VISCA cable, and the modem connects
with RS-232C cable.
6
1
2
~ ~
1
AC IN
(12V)
COM 1
+
6
3
A3 C3 A4 C4 B
A
2
3
4
5
6
7
8
COM 2
– A1 C1 A2 C2 RELAY
7
4 ETHERNET 10/100 Terminal (RJ-45)
Using Category 5 twisted-pair cable, connect this
terminal of the server to the network as a 10-Mbps
Ethernet or 100-Mbps Fast Ethernet device.
5 I/O Terminal Block Connector
This is an accessory input/output connector, used for
alarm inputs. Refer to "Basic Specifications" on page
41 for details.
6 MAC Address
The MAC address is shown on the label on the bottom.
4
ETHERNET
10 /100
Advertisement
Table of Contents
