Table of Contents
Advertisement
Installation
Modem Setup
The
(Modem) icon is displayed when [Modem] is
selected for the serial port usage. When a modem is
connected to the video network station, if the
"Modem" icon does not appear next the "COM2" icon,
refer to "Serial Port Settings" on page 18 to reset the
serial port usage.
1
Click the "Modem" icon.
The "Modem Settings" page appears.
2
Set the necessary items. Settable items are shown
in the table below.
Setting
Description
Modem Type
Select the connected modem. If a
matching modem type cannot be
found, select [Generic].
Ignore Dial
Select [NO] to start connecting after
Tone
detecting a dial tone, or select [YES] to
start connecting without a dial tone.
Type
Select [Null] if the modem is connected
with a null-modem (crossed) cable, or
[Autodetected Modem] otherwise.
Baud Rate
Select the communication speed
between the serial port and modem.
Dial Prefix
Select either [Tone Dialing (ATDT)] or
[Pulse Dialing (ATDP)] according to
the type of telephone circuit used for
the modem connection.
Flow Control
Select [CTS/RTS] if flow control is
available, or [OFF] to disable flow
control.
Init String
If [Modem Type] is set to [Generic
Modem], enter the required modem
initialization string.
3
Click the "Save" icon to save your settings when
finished.
22
ISP (Internet Service Provider) Setup
The
(ISP) icon is displayed when [Modem] is
selected for the serial port usage. The "ISP" icon is
used to set up connection with an "ISP" (Internet
Service Provider). If the "ISP" icon is not displayed,
reset the serial port usage according to "Serial Port
Settings" on page 18.
1
Click the "ISP" icon.
The "ISP Settings" page appears.
2
Set the necessary items. Settable items are shown
in the table below.
Setting
Description
Select ISP
Select the destination ISP. If a
matching ISP cannot be found, select
[Generic].
Phone
Enter the telephone number of the
Number
connection destination.
Alternative
Enter the alternate telephone number
Number
to be used if connection cannot be
established with the above number.
User Name
Enter the user name for ISP host login.
Password
Enter the password.
Connection
Select [Always Open] to allow
unlimited connection to the ISP. Select
[Close after] to limit the connection
time, and enter the time limit (in
seconds). To have the ISP connection
cut automatically after transferring
images, select [Optimized].
Redial
Enter the number of times to attempt
Attempts
redialing when a connect attempt fails.
Redial Interval
Enter the interval (in seconds)
between redial attempts.
3
Click the "Save" icon to save your settings when
finished.
Advertisement
Table of Contents
