8 [PRESET] Drop-Down List
Select a preset camera position by name from this list
to set the camera to that fixed position (previously set
by the system administrator).
9 [HSR] Button
Clicking this button changes to the HSR view, in
which images of video cameras connected to an HSR-
1/1P/2/2P can be monitored, and the HSR-1/1P/2/2P
can be controlled. Refer to the "HSR View Mode" on
page 33 for details.
0 [Admin] Button
Clicking this button displays the "Administration
overview" page, where video network station settings
and management can be performed. Access to this
page is normally restricted to the system administrator.
qa Site Name
This is the name assigned to the overall video network
qs Camera Title
This is the title of the video camera.
qd Date and Time
This is current date and time.
qf Video Camera Images
Clicking at a point in an image causes the video
camera to pan and tilt so that the clicked point
becomes the center of the image.
qg Snapshot Icon
Clicking this icon saves the displayed image in the
video network station as a [Fullsize] (352 × 240
NTSC) JPEG format file. When two or more images
are displayed, the Snapshot icons are displayed at the
outer corner of the corresponding image.