Table of Contents
Advertisement
4
Repeat the above steps to add more users.
Up to 20 users can be registered.
5
Click the [Close] button to close the dialog box.
Unregistering a User
1
Select the name of the user to be unregistered from
the [User name] drop-down list in the [Delete user]
area, and click the "Del" icon.
The registration of the selected user is deleted.
2
To delete another user registration, repeat step 1.
3
Click the [Close] button to close the dialog box.
Displaying the Parameter List
Clicking the
(View Parameter List) button
opens a new window to display the "Parameter
Settings List" page.
All settings except passwords can be viewed in this
list.
Displaying Release Notes
Clicking the
opens a new window to display the "Release Notes"
page.
The "Release Notes" page shows the video network
station firmware and software version information.
(View Release Notes) button
Displaying the Log File
Clicking the
(View Log File) button opens a
new window to display the "Log file Events" page.
Recently executed commands are displayed on the
"Log file Events" page. The log file is used to check
whether a special event was executed, such as whether
a command was issued before or after an alarm
occurred. The log also serves as a diagnostic tool to
resolve operational problems.
Restarting the Video network station
Clicking the
(Restart) button displays a
confirmation message for you to restart the video
network station. If you click [OK], the "General
Settings" page will be redisplayed after the server
restarts.
Reverting to Factory Default Settings
Note
This operation returns all settings, including the video
network station IP address, to their factory-default
values.
Clicking the
(Factory Default) button
displays a confirmation message. If you click [OK], all
settings in the video network station are returned to
their original shipped state.
17
Advertisement
Table of Contents
