Table of Contents
Advertisement
Installation
Dialog boxes relating to [Input 1] (Alarm Input 1) to
[Input 4] (Alarm Input 4) are displayed for the
following items.
Setting
Description
Alarm Enabled
Alarm input is enabled when this box is
checked.
Always
Alarm input is always enabled when
this radio button is selected.
Restricted
Alarm input is enabled for a specific
Between
time of day when this radio button is
selected.
Start
When the [Restricted Between] radio
button is selected, enter the start time
here.
Stop
When the [Restricted Between] radio
button is selected, enter the stop time
here.
Mon to Sun
Check the boxes to specify particular
days on which the alarm input should
be enabled.
Alarm ON at:
Check this box to have a rising alarm
Positive-edge
input signal indicate the occurrence of
an alarm event.
Alarm ON at:
Check this box to have a falling alarm
Negative-edge
input signal indicate the occurrence of
an alarm event.
Image every X
Select the storage interval for images
second(s)
during an alarm event.
Number of PRE
Enter the number of images (0 to 99)
alarm images
to be saved prior to an alarm event.
Number of POST
Enter the number of images (0 to 99)
alarm images
to be saved after an alarm event.
Alarm duration
Enter the time (seconds) from an
alarm occurrence until the alarm mode
is cleared.
No Upload
Select this radio button to disable
transfer of saved images.
Upload Via FTP
Select this radio button to transfer
saved images by ftp.
Host Name
Enter the host name of the transfer
destination.
User Name
Enter the user's name on the host at
the transfer destination.
Password
Enter the password of the above user.
Upload Via e-mail
Select this button to send a saved
(one image only)
image as an e-mail attachment.
To Email
Enter the mail address of the
destination for image files. Multiple
addresses may be entered by
separating with commas. Up to 100
characters may be entered.
Subject
Enter the title text for the e-mail.
Text
Enter the body text for the e-mail.
14
Setting
Description
Camera Link
Check this box to include in the e-mail
a link to the real-time image on the
camera where an alarm event occurs.
Upload Path: (FTP
Enter the path of the save destination
only)
for image files sent by ftp to a host.
Base File Name
Enter the base file name for image
files to be sent.
Date/Time Suffix
Select this radio button to have the
date and time appended to the base
file name.
Sequence
Select this radio button to have a
Number
sequential number appended to the
Suffix set to
base file name.
Maximum
Sequence
When a sequential number is attached
Number
to the base file name, to set an upper
Suffix up to:
limit to the numbering, select this radio
button and enter the upper limit.
Network Settings
The
(Network Settings) icon is used for settings
related to the supporting network protocol. Clicking
the "Network Setting"s icon displays the following
screen.
Settings can be made with the following procedures.
•
(Network Wizard) icon: click to display Wizard
instructions for making the settings.
•
(Detailed View) icon: click to display a dialog
box with [TCP/IP], [DNS] and [SMTP EMail] tabs
that you can select to make corresponding settings.
Advertisement
Table of Contents
