Replacing The Tires - Polaris 9400 Sport 4WD Owner's Manual

Page 16
Figure 30. Cut Tabs
6. Repeat this procedure to install the second
brush.
5.4

Replacing the Tires

1. Pull on the inside of the old tire to remove the
tire lip from the wheel (Figure 31).
Figure 31. Pull the Old Tire Over the Wheel
2. Remove the old tire (Figure 32).
Figure 32. Remove the Old Tire
3. To replace the tire, position the tire on the
wheel making sure to orient the tire so that
the word INSIDE is toward the body of the
cleaner (Figure 33).
1
2
1
Towards
Body
Figure 33. Tire Replacement Orientation
4. Push one side of the tire on to the wheel and
fit the rib of the tire in the groove of the wheel
(Figure 34).
Figure 34. Start on One Side of the Tire
5. Work the tire onto the wheel and verify the
rib of the tire is positioned properly within the
groove of the wheel (Figure 35).
Figure 35. Work the Tire On Around the Wheel
6. Push and position the rib of the inner side of
the tire in the groove of the wheel (Figure 35).
If needed, turn the wheel gently to help with
2
3