Appendix A - Using The Webgui (Full Guide); Running The Highpoint Web Raid Management Software (Webgui) - HighPoint RocketStor 6328 User Manual

APPENDIX A - Using the WebGUI (full guide)

HighPoint's web-based RAID Management Software (also known as the WebGUI) is used to monitor and configure
hard disks and RAID arrays attached to the HighPoint RocketStor adapter.

1. Running the HighPoint Web RAID Management software (WebGUI)

After downloading and installing the WebGUI, open the WebGUI by double-clicking the icon found on the
desktop:
Login to the WebGUI and configure the RAID arrays. Use the default user name: RAID and password: hpt to login
Remote Login
Users connected to a local network can remotely access the WebGUI through the IP address the machine is
located on.
Open a terminal and type in the following command: ifconfig
Once the IP address is obtained users can remotely access the machine by typing in the following address:
http://IP Address:7402
HighPoint Technologies Inc.
18