Appendix B - Web Raid Management Icon Definition List - HighPoint RocketStor 6328 User Manual

Appendix B - Web RAID Management ICON Definition List

The following table lists the definition of each ICON used by the RAID Management interface (The examples use a
RAID 5 array for reference).
Icon Description
The array status is "Normal".
The array has stopped "Initializing". Current status is "Uninitialized".
The array is "Initializing": Initializing (Foreground) and Initializing(Background).
The array is performing a data consistency checking and its current status is
"Verifying".
The array status is "Critical" - a disk is missing from the RAID array.
The array status is "Verifying". This indicates that the array is running a data
integrity check.
The array status is "Rebuilding". This occurs when the data verification fails or when
adding a new disk into the "Critical" array.
The array status is "Critical". This indicates that current array needs "rebuild". This
icon will also show up on a device in a RAID disk member as needing to "rebuild" its
data.
The status of the "Array" or "Device" is "Disabled".
The array is "Initializing". There are two types of initialization- Foreground and
Background.
The array OCE/ORLM operation has stopped.
This icon means the RAID array is "Uninitialized". On the RAID array either
Foreground or Background initialization has stopped (Incomplete).
On a disk (
initialized for the 1
The device status "Legacy". An existing file system has been created on the HDD.
The device is a "Spare". It is used to replace the failed RAID disk member to rebuild
automatically.
), it indicates that the disk is not initialized and will need to be
st
time before it can be used with HighPoint RAID card.
HighPoint Technologies Inc.
37