Using The Raid Disk With Windows - HighPoint RocketStor 6328 User Manual

g. After the array has been created, it will be displayed under the Logical tab.

7.2 Using the RAID disk with Windows.

Any previously used single disk, preconfigured OS RAID drives or HighPoint RAID array attached to the RS6328
will be recognized automatically.
A newly created RAID Array or a new disk will be recognized as an empty disk. It must be initialized before it
can be used.
Initializing new storage under Windows：
1) After a new disk is installed or RAID array has been created, open the Windows disk management utility. Right
click the new disk and select Initialize Disk.
2) Create and format new partition on the new disk.
HighPoint Technologies Inc.
12