Table of Contents
Advertisement
c.
Choose and select the RAID disk members.
d. Choose the target RAID Array capacity option
Note: The Target RAID Array capacity must be equal or larger than the source RAID array.
e.
Click Create button to begin the OCE/ORLM process
Step 4: Once the OCE/ORLM procedure is complete, Disk Management will recognize the new storage
capacity. There are several ways to configure this storage:
a.
Create a new Volume (new partition or disk).
b. Extend the existing partition using the Extend Volume option.
HighPoint Technologies Inc.
16
Advertisement
Table of Contents
