Table of Contents
Advertisement
Fingerprint reader board
Description
Fingerprint reader board
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the Phillips M2.0×3.0 screw (1) that secures the fingerprint reader board and bracket to
the top cover.
3.
Release the ZIF connector (2) on the fingerprint reader board and disconnect the cable (3) from
the connector.
4.
Remove the fingerprint reader board bracket (4) from the top cover.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Keyboard (see
Keyboard on page
Top cover (see
Top cover on page
36).
43)
45)
47)
49)
Component replacement procedures
Spare part number
608225-001
53
Advertisement
Table of Contents
