Table of Contents
Advertisement
Fingerprint reader board
NOTE:
The fingerprint reader board does not include the fingerprint reader board cable. The
fingerprint reader board cable is included in the Cable Kit, spare part number 665593-001.
Description
Fingerprint reader board (includes bracket)
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the fingerprint reader board, bracket, and cable:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the fingerprint reader board cable (1) from the surface of the top cover. Remove the two
Phillips PM2.0×2.0 screws (2) that secure the fingerprint reader board and bracket to the
top cover.
66
Chapter 4 Removal and replacement procedures
Battery on page
47), and then remove the following components:
Optical drive on page
Hard drive on page
51)
Keyboard on page
59)
Top cover on page
62)
48)
Spare part number
665310-001
Advertisement
Table of Contents
