Table of Contents
Advertisement
Bluetooth module
NOTE:
The Bluetooth module cable is included in the Cable Kit, spare part number 608227-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the Bluetooth module:
1.
Position the computer upright with the front toward you.
2.
Lift the tape near the system board connector (1) that secures the Bluetooth module cable to the
system board.
3.
Disconnect the cable from the system board (2).
66
Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
36).
Hard drive on page
43)
Optical drive on page
Keyboard on page
47)
Top cover on page
49)
45)
Spare part number
537921-001
Advertisement
Table of Contents
