Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
Reverse this procedure to install the power button board.
Remove the power button board:
1.
Turn the top cover upside down with the rear edge toward you.
2.
Remove the two Phillips M2.0×3.0 screws (1) that secure the power button board to the top
cover.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Keyboard (see
Keyboard on page
Top cover (see
Top cover on page
36).
43)
45)
47)
49)
Component replacement procedures
Spare part number
658706-001
55
Advertisement
Table of Contents
