Display Assembly - HP Pavilion dm4 Entertainment PC Maintenance And Service Manual

3. Remove the power button board (2).
Reverse the above procedure to install the power button board.

Display assembly

Description
35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED display assembly for use in Dark
Umber models
35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED display assembly for use in
Steel Gray models
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
on page
6. Remove the following components:
a. WLAN module (see
b. Keyboard (see
56 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
40).
WLAN module on page
Keyboard on page
36).
40)
47)
Spare Part Number
636941-001
650675-001
WLAN module