Fingerprint Reader Board - HP EliteBook 860 G9 Maintenance And Service Manual

5. Remove the USB board from the computer (6).
Reverse this procedure to install the USB board.

Fingerprint reader board

To remove the fingerprint reader board, use this procedure and illustration.
Table 6-7 Fingerprint reader board description and part number
Description
Fingerprint reader board
Fingerprint reader board cable (included in cable kit)
Before removing the fingerprint reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the fingerprint reader board:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer.
2. Disconnect the cable from the ZIF connector on the fingerprint reader board (2), and then remove the
bracket from the computer (3).
(Preparation for disassembly on page
Bottom cover on page
Battery on page 41).
40).
40).
Fingerprint reader board
Spare part number
N02325-001
N08556-001 (FPC)
N08557-001 (FFC)
55