I/O Terminal Block; Pin Assignment - GeoVision GV-BX120D User Manual

16.6 I/O Terminal Block

The terminal block, located on the back panel of the Fixed IP Dome,
provides the interface to one input and one output devices. The I/O
terminal block can be used for applications such as motion detection, event
alerts via E-Mail and FTP, and center monitoring through Center V2 and
VSM.

16.6.1 Pin Assignment

The Fixed IP Dome supports one digital input and one digital output of dry
contact.
I/O
1 2
Figure 16-21
250
Pin
1
2
3
3
Function
Digital Output
GND
Digital Input