Chapter 8 The I/O Terminal Block; Pin Assignment - GeoVision GV-IP Camera 1.3M User Manual

Chapter 8 The I/O Terminal Block

The 4-pin terminal block, located on the back panel, provides the interface to one digital
input and one relay output. The I/O terminal block can be used to develop applications for
motion detection, event alerts via E-Mail and FTP, and center monitoring by Center V2 and
VSM.

8.1 Pin Assignment

The pin assignment for the terminal block:
1 2 3 4
Figure 8-1
66
Pin Function
1 Output +
2 Output -
3 Input +
4 Input -