Handset Administration; Faqs - Polycom SpectraLink 8020 User Manual

HANDSET ADMINISTRATION

FAQs

How does the handset power off and power on?
END
The key is the power on/power off key. Press and hold it to turn the
handset on. Turn the handset off from the standby mode by pressing and
END
holding the key. If you are in an active call, end the call by pressing
END
the key. This returns the handset to the standby mode, then press
END
again to turn the handset off.
How do I place a call and terminate a call?
START
To place a call, press the key and then dial the number. End
END
the call by pressing the key. You can also use the speakerphone
Spkr START
( softkey) instead of the key.
Can I change the ring?
The ring is fully adjustable and may be set differently for different pro-
files. For a complete explanation of how to change the ring, see the Pro-
file Settings section of this guide.
How do I change the voice volume and the ringing volume?
Whether using a headset, the speakerphone, or the internal speaker,
the speaker volume for the current call may be raised or lowered by
pressing the up and down volume buttons on the side of the handset.
The volume buttons may be pressed while the handset is ringing to
raise or lower the ring volume, which also changes the ring volume set-
ting in the current profile.
40