Polycom SpectraLink 8020 User Manual page 16

If you want to Then
Turn handset off
Unlock the keypad
Lock the keypad
Make an internal
Make an external
Make an emergency
Select a line
16
Press and hold the
sound. If you are in a call, hang up first, then
turn off the handset.
Unlk
Press the
keypad.
Lock
Press the
START
Press the
call
then dial the extension.
START
Press the
call
then dial the number just as you would from
your desk phone.
Open the speed-dial list to determine if you
call
have an emergency speed-dial number that
has been programmed by your system
administrator. If so, it will appear as the first
item on the speed-dial list with a >
in front of it and the programmed keypress
as the next character. The
volume up and down buttons on the side of
the handset. Press the programmed key for 3
seconds to activate the call. See Open the
speed-dial list below.
If multiple lines are available, your
telephone system may require you to select
a line before dialing a number. Press
and the number key corresponding to the
desired line. You will hear a dial tone.
END
key. One chirp will
#
softkey, then , to unlock the
softkey.
key, wait for a dial tone,
key, wait for a dial tone,
^
represents the
LINE