Creating A Proper Ground - Pro Spot AL-5 Instruction Manual

AL-5

Creating A Proper Ground

AL-5
Ground Plate
Clean surface, weld a stud using the AL-5.
Place the ground plate on top of the stud, use
a wing nut or similar to tighten the plate to the panel.
The closer the ground to the weld location, the better.
Ground Clamp
Alternative method to achieve ground.
Clean surface on work piece and use ground
clamp in this location. The closer the ground
to the weld location, the better.
Copyright © Pro Spot International, Inc. 2005-2011 Page 3