Quasimidi Technox Owner's Manual page 31

16.) Working with the sequenzer
A sequencer-multi-setup will be activated as follows:
Function
Selection of „Write/Dump" menu.
Selection of „Load Setup" menu. If
not already in sequencer mode, this
mode will be activated when a setup
is loaded.
Confirm Selection.
Select one of the 14 setups.
Exit the "WRITE"-Menu.
Enabling the setup-loading by using program change informations received via MIDI is simply done by
going into the „Edit System" menu and setting the „RxSetupC" (Receive Setup Change) parameter to
„ON". Please note that it further won't be possible to receive any program change informations for the part
that is identical to the selected MIDI system channel when RxSetupC is set to „ON". Program changes can
be received on all other 15 parts.
Setup loading via MIDI will be enabled by doing the following:
Function
Selection of „Edit System" menu.
Select menu page „<7> RxSetupC"
Enable MIDI switching.
Exit the "Edit System" menu.
User action
(Dials/Keys)
1.) Press „EDIT/OK" key.
2.) Use one of the dials to select the
menu.
1. Press „EDIT/OK" key.
2. Use the „PARAMETER/
SOUNDGROUP" dial to get to
„Load Setup" menu.
Press "EDIT/OK" Key
1.) Use "VALUE/SOUND"-Dial to
select one setup.
2.) Confirm selection with
"EDIT/OK" key.
Press „EXIT" key until you reach the
main page.
User action
(Keys/Dials)
1.) Press "EDIT/OK" key.
2.) Use the „PARAMETER/
SOUNDGROUP" dial to select
"Edit-system" menu.
1. Press „EDIT/OK" key
2. Use the „PARAMETER
/SOUNDGROUP" dial to get to to
„RxSetupC" sub-menu.
Use „VALUE/SOUND" dial to set
the function to „ON"
Press „EXIT" key until you reach the
main page.
Display-Message
\Edit/Function
<8>\Write/Dump..
<2>\Load\Setup?
Yes<OK>\No<EXIT>
Load\14\Untitled
Yes<OK>\No<EXIT>
<2>\Load\Setup?
\\\\\\\\\\\ok!
\T_e_c_h_n_o__x
13:A001:\_303Lead
Display-Message
\Edit/Function
<7>\Edit\System
\Edit\System
<7>\RxSetupC:OFF
\Edit\System
<7>\RxSetupC:\ON
\T_e_c_h_n_o__x
13:A001:\_303Lead
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/
31