Quasimidi Technox Owner's Manual page 14

8.) Effekt-Editierung
Early-Reflection-
These are reverb effects with an accent on early reflections.
Effekt
|1>
<2>
<3>
<4|
Raindrops
Creates an effect somewhere between Reverb and Echo
|1>
<2>
<3>
<4|
Delay-Effekte
The following effects represent Echo-effects. The HQ-Delay has a higher frequency bandwidth than the Long-delay, but
the Long-delay can produce longer delay times.
|1>
<2>
<3>
<4>
<5|
No Effect
The algorithm 21 is especially made for having no effect FX1 on the parts, without turning the effect sends to zero.
|1>
14
The effect-types 14-17 offer 4 different early reflection-programs.
Edit\FX1\Typ
|1>\14:EarlyRfl1
This parameter defines the input level. Take care that at least one part has the
Edit\FX1\Paramtr
effect send open. Otherwise you will hear no effect-signal.
<2>\InputLev:127
This parameter controls the percentage of FX2 feed-back to the input of FX1 (see
Edit\FX1\Paramtr
graphic on page 12). This makes it possible to chain the two effect processors.
<3>\SerFeed:\\\0
Here the decay-time of the reverb can be controlled.
Edit\FX1\Paramtr
<4|\Decay:\\\\50
The algorithm 18 offers the raindrop-effect.
Edit\FX1\Typ
|1>\18:Raindrops
This parameter defines the input level. Take care that at least one part has the
Edit\FX1\Paramtr
effect-send open. Otherwise you will hear no effect-signal.
<2>\InputLev:\90
This parameter controls the percentage of FX2 feed back to the input of FX1 (see
Edit\FX1\Paramtr
graphic on page 12). This makes it possible to chain the two effect processors.
<3>\SerFeed:\\\0
This parameter controls how fast or slow the raindrop effect finishes.
Edit\FX1\Paramtr
<4|\Decay:\\\\50
The algorithms 19 and 20 offer the echo-effects of FX1.
Edit\FX1\Typ
|1>\19:HQ-Delay
Here you can control the input volume.
Edit\FX1\Paramtr
<2>\InputLev:\90
This parameter controls the percentage of FX2 feed-back to the input of FX1 (see
Edit\FX1\Paramtr
graphic on page 12). This makes it possible to chain the two effect processors.
<3>\SerFeed:\\\0
This parameter controls the delay time. The delay time is the time between single
Edit\FX1\Paramtr
echoes.
<4>\Delay:\361ms
This parameter indicates how often an echo will be repeated.
Edit\FX1\Paramtr
<5|\Feedback:\64
Effect 21 offers the "no effect"-algorithm
Edit\FX1\Typ
|1>\21:noEffect
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/