FTP: USER command - Password required for 'polycomftp'.
FTP: USER command - User 'polycomftp' logged in.
FTP: TYPE command - Type is set to I.
FTP: CWD command - directory changed to 'ADTRAN'.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for ls (10.10.20.3,1031).
FTP: NLST command - 'adtran_boot.txt' transfer complete.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for adtran_boot.txt (10.10.20.3,1032).
FTP: RETR command - BINARY transfer complete.
IP.FTP SERVER (RETR) Transfer of file '/ADTRAN/adtran_boot.txt' complete for remote host '10.10.20.3'.
Note: The remainder of the file transfers has been removed from this debug example. Confirm that all files listed earlier in
this document are downloaded.
Restoring a Phone to the Factory Default
At times it may be necessary to clear a phone of its current configuration. With IP 700 Series phones, this is accomplished
by using the menu on a phone while it is idle. The steps below outline this process.
From the idle screen of a registered phone:
1. Press the Menu key.
2. Select Phone Settings.
3. Select Reset.
4. Press the Edit softkey.
5. Press the Factory softkey.
Note: The contrast, headset switch hook, personal phonebook, and any other options configured directly on the phone will
be cleared to default during the factory default process.
Related Documentation
User Account Configuration Guide -
IP 700 Series Admin Guide (v1.3.16 and below) -
IP 700 Series Admin Guide (v2.1.0 and above) -
Configuring Status Groups -
Configuring Shared Line Accounts –
Configuring Shared Call Appearances -
Configuring Handset Paging Groups -
Setting the Time Zone Offset for the IP 700 Series Phones -
Updating the Global Phone Directory -
https://supportforums.adtran.com/docs/DOC-3454
https://supportforums.adtran.com/docs/DOC-2320
https://supportforums.adtran.com/docs/DOC-3483
https://supportforums.adtran.com/docs/DOC-2260
https://supportforums.adtran.com/docs/DOC-3464
https://supportforums.adtran.com/docs/DOC-2333
https://supportforums.adtran.com/docs/DOC-2334
https://supportforums.adtran.com/docs/DOC-2940
https://supportforums.adtran.com/docs/DOC-2938
11
Need help?
Do you have a question about the NetVanta 7000 Series and is the answer not in the manual?