ADTRAN NetVanta 7000 Series Configuration And Troubleshooting Manual page 10

Interpreting the Debug Output
Verify a phone is requesting and able to receive an IP address.
#debug ip dhcp-server
2008.05.15 23:50:43 DHCP.SERVER Processing Discover Message (Xid = 443f4c02) on
10.10.10.0/255.255.255.0 from 00:A0:C8:00:9a:63
2008.05.15 23:50:43 DHCP.SERVER Offering IP Address 10.10.10.2 to 00:A0:C8:00:9a:63
2008.05.15 23:50:43 DHCP.SERVER Server sent an Offer to the client
2008.05.15 23:50:48 DHCP.SERVER Processing Request Message (Xid = 353f4c02) on
10.10.10.0/255.255.255.0 from 00:A0:C8:00:9a:63
2008.05.15 23:50:48 DHCP.SERVER Server sent an Ack to the client
2008.05.15 23:52:26 DHCP.SERVER Processing Discover Message (Xid = c6394c02) on
10.10.20.0/255.255.255.0 from 00:A0:C8:00:9a:63
2008.05.15 23:52:26 DHCP.SERVER Offering IP Address 10.10.20.3 to 00:A0:C8:00:9a:63
2008.05.15 23:52:26 DHCP.SERVER Server sent an Offer to the client
2008.05.15 23:52:31 DHCP.SERVER Processing Request Message (Xid = b9394c02) on
10.10.20.0/255.255.255.0 from 00:A0:C8:00:9a:63
2008.05.15 23:52:31 DHCP.SERVER Server sent an Ack to the client
Verify the correct files are being requested.
#debug ip ftp-server
FTP: USER command - Password required for 'polycomftp'.
FTP: USER command - User 'polycomftp' logged in.
FTP: TYPE command - Type is set to I.
FTP: CWD command - directory changed to 'ADTRAN'.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for ls (10.10.20.3,1025).
FTP: NLST command - 'adtran_00a0c8009a64.txt' transfer complete.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for adtran_00a0c8009a64.txt (10.10.20.3,1026).
FTP: RETR command - BINARY transfer complete.
IP.FTP SERVER (RETR) Transfer of file '/ADTRAN/adtran_00a0c8009a64.txt' complete for remote host '10.10.20.3'.
FTP: USER command - Password required for 'polycomftp'.
FTP: USER command - User 'polycomftp' logged in.
FTP: TYPE command - Type is set to I.
FTP: CWD command - directory changed to 'ADTRAN'.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for ls (10.10.20.3,1028).
FTP: NLST command - 'adtran_firmware_712.txt' transfer complete.
FTP: PORT command - opening port from 10.10.20.3.
FTP: BINARY data connection for adtran_firmware_712.txt (10.10.20.3,1029).
FTP: RETR command - BINARY transfer complete.
IP.FTP SERVER (RETR) Transfer of file '/ADTRAN/adtran_firmware_712.txt' complete for remote host '10.10.20.3'.
Note: The adtran_firmware_7xx.txt file tells the phone what application and boot version of the software to download. If
the version contained in the phone is the same one listed in the file, the phone will not download the application or boot
version.
10