Lan Setup - Tenda N300 User Manual

4.2.4 LAN Setup

Here you can configure the LAN IP Address and Subnet Mask. This IP address is to be used to access
the device's settings through a web browser. Be sure to make a note of any changes you apply to this
page.
IPv4
 IP Address: The device's LAN IP address. The default setting is 192.168.1.1.

Subnet Mask: The LAN subnet mask of the device. Combined with the IP address, the IP Subnet
Mask allows a device to know which other addresses are local to it, and which must be reached through
a gateway or modem router. You can change the subnet mask to fit your network.
Wireless N300 ADSL2+/3G Modem Router User Guide
- 61 -