Tenda N300 User Manual page 7

Blinking
Off
Solid
WLAN Blinking
Off
Blinking
SYS
Solid/Off
Solid
WPS Blinking
Off
Solid
PWR
Off
Solid
Blinking
3G/USB
Off
Solid
INTERNET
Off
Wireless N300 ADSL2+/3G Modem Router User Guide
The device is negotiating with DSLAM.
No phone cable is connected to the DSL port or phone
cable is connected improperly.
Wireless radio is on.
The wireless interface is transmitting data.
Wireless radio is off.
System is functioning properly.
System is malfunctioning.
Clients have successfully joined your wireless network
using the WPS feature during the first two minutes.
WPS-PBC is enabled and your wireless network is
accessible to WPS-PBC enabled clients.
No clients join your wireless network using the WPS
feature during the first two minutes.
The device is receiving electrical power.
Electric power is not supplied to the device or the device
is malfunctioning.
The device has identified an attached USB storage device
or has successfully joined a 3G network.
Connecting to 3G network...
The USB port is not connected or has not identified an
attached USB storage device or the device fails to join a
3G network.
The device has obtained an IP address for Internet access.
The device fails to obtain an IP address for Internet access.
- 2 -