Wireless Clients; Lan Settings - Tenda teg2124t User Manual

Wireless n300 wall plate access point

Hide thumbs Also See for teg2124t:

Table of Contents

1.4 Wireless Clients

Here you can view the MAC addresses and connection speed of the wireless clients that

currently connect to each SSID.

To view wireless clients connected to a specific SSID, simply select it from the drop-down

list on the screen.

Here you can configure the device's LAN IP address for Internet access. This IP address

is also to be used to access the device's settings through a web browser. Most of the

default settings work in most cases. However, if your access point is part of a more

complex LAN network, then modify the settings to meet the requirements of your network

based on the explanation of the various fields.

Address Mode-Static IP: Manually specify the Static IP information (LAN IP address,

subnet mask, gateway, DNS server address) that corresponds with your existing

networking equipment.

Address Mode-Dynamic IP: Select it if you already have an active DHCP server on your

existing network. The wireless access point gets its IP address, subnet mask, and default

gateway settings automatically from the DHCP server on your network when you connect

the access point to your existing network.

Table of Contents