To Access The Internet With An Ethernet Cable - Tenda N300 User Manual

Wireless N300 ADSL2+/3G Modem Router User Guide
Step 4: Press the ON/OFF button to turn on the device.
Step 5: Check the device's LEDs, make sure the PWR and DSL LEDs are always on, the WLAN LED
and the LED of a corresponding port that is connected to a PC are always on or blinking.
B. To access the Internet with an Ethernet cable
Step 1: Connect the Ethernet cable from the incoming Internet side to port 1 on your device.
Step 2: Connect your device's port 2, 3 or 4 and your PC's NIC port using an Ethernet cable.
WIth IPTV enabled (By default, the IPTV feature is disabled.), port 4 can only connect to an IPTV
set-top box.
Step 3: Connect the device to a power outlet.
- 2 -