Advertisement
INSTALLING EXTERNAL FAN
MOTOR
Types of Installation: To make the installation
easy, the motor can be fixed on the wall, on the
ceiling, or on the floor in a horizontal or vertical
position
The motor can be mounted using the brackets (D)
and screws (C) supplied with the motor.
As per Diagrams 7—8, also supplied are rubber
grommets (B) which are designed to cushion any
vibration from the motor. Screws (A) for mounting
the motor.
Connection of pipes: The motor has 2
connections. An inlet, and an outlet. Before
connecting the pipes, make sure to check the flow
direction to ensure correct performance. This can
be confirmed on a label on the motor.
Try to avoid any tight bends and no more than two
right angle bends to maintain performance of air
extraction.
Electrical connection: There is a cord to connect
the motor to the hood. It's fitted with a six pin plug
which connects to the top of the hood. (Diagram 9)
There is also an earth lead which can be attached
to any screw on the hood. The length of this cable
is approximately 6.5 meters.
Advertisement
