Advertisement
Wall fixing: By using the special drilling jig which is
supplied with the hood, perforate the wall according
to the pattern indicated by the jig. Pay attention not
to damage water pipes or electrical wiring etc.
Diagram 2 Attach bracket (S) to the wall with
appropriate screws . Now hook the hood onto the
bracket
Diagram 3 Adjust the horizontal and vertical
positions by acting on the special metric screws
Diagram 4 After the appliance is adjusted, fix the
hood in position by inserting and tightening the
safety screws (C) in Diagram 2
Diagram 2
Diagram 3
Fitting of venting pipe cover: Fix the Y bracket to
the wall and ceiling with appropriate screws .
Diagram 5 to install the cover, fit the cover to the
top of the hood and slide up the inner cover to the
ceiling. Attach screws through sides at top.
Diagram 6
Y
Diagram 5
Diagram 4
Diagram 6
Advertisement
