MakerBot Replicator 2X User Manual page 50

ADVANCED OPTIONS
To use the settings under Advanced Options, you must select one of MakerBot
Desktop's base profiles (Low, Standard, or High). When you change any of the settings
in Advanced Options, an asterisk will appear next to the profile name in the Settings
dialog. The asterisk indicates that the base profile is no longer in its default state.
These options provide control over specific slicing options. To access the advanced
options, click the Advanced Options button towards the bottom of the Settings dialog.
This button toggles the visibility of the advanced options, which are grouped into three
tabs: Quality, Temperature and Speed.
To change a setting in the Advanced Options tabs, highlight the current number and
enter a new one, or use the up and down arrows to incrementally change the values.
NOTE: The settings in Advanced Options do not edit the base profiles; they only override
them. MakerBot Desktop will save the set of overrides for you, but you can always return
the profile to its original state by clicking the Use Defaults button at the lower left of the
Advanced Options area.
50 ADVANCED SETTINGS