MakerBot Replicator 2X User Manual page 23

THE INFO AND SETTINGS MENU
Preheat Settings. This entry lets you
change the preheat temperatures for the
extruders and build plate. Remember
that that the temperatures are in
degrees Celsius.
• Use the up and down arrow buttons
to navigate to the setting you want
to change (Right Tool, Left Tool,
Platform)
• Press the M button to select the
setting you want to change.
• Use the up and down arrow buttons to
scroll through the available options for
each setting.
• Press the M button to select and
confirm your setting.
Version Number. This entry displays the
version number for the firmware on your
MakerBot Replicator 2X.
23 ONBOARD OPERATIONS
CONTINUED
Restore Defaults. This entry restores
your MakerBot Replicator 2X to the
default, factory settings. This option
affects only settings that you can change
through the LCD menus. Settings that you
can change only using MakerBot Desktop
will not be restored to their defaults.
Exit menu. This entry returns you to the
top-level menu.