Advertisement
FIGURE 13
7
STEP 13:
• Route threaded end of the 122-3/4" LAT CABLE (12) around pulleys in TOP BOOM (2) and PULLEY
BLOCK ASSEMBLY. Route 122-3/4" LAT CABLE (12) down through hole in TOWER BRACE (7)
as shown in FIGURE 13.
FIGURE 14
2
3/8 X 2-1/4" 21
12
STEP 14
:
• SECURELY assemble one 4-1/2" PULLEY (13) between the plates of the TOP BOOM (2) using one
3/8 X 2-1/4" BOLT (21) and one 3/8" LOCK NUT (27) as shown in FIGURE 14. (NOTE: Make
sure the cable runs in the groove of the PULLEY.)
27
13
11
12
PULLEY
BLOCK
ASSEMBLY
2
Advertisement
