Qvis APOHD-PTZ20 User Manual page 30

Please refer to
Figure 7-3
to install clamp and pole bracket.
Pull the cable out of the pole accessories and then use clamp to fix the pole accessories to the pole. Finally, you
can use glass cement to the output hole to waterproof it.
Clamp and pole bracket connection Pole bracket and the pole connection
Figure 7-3
After you installed bracket and external cover, loosen the captive screws and open the panel, pull the power
cable through the hanging bracket and then fix the hanging bracket to the wall. Please make sure it is waterproof
between the bracket and the wall. See Figure 7-4.
22
© Copyright Qvis® All documentation rights reserved.