7 POLE MOUNT BRACKET INSTALLATION
Pole mount bracket and its components are shown as below. See
7-1
Figure
.
7.1 Installation
7.1.1 Installation Requirements
The corner mount speed dome can be installed in the solidly constructed wall in either indoor or outdoor
environments. Please make sure:
Before the installation, please make sure the pole bracket can sustain 4X the weight of the speed dome.
The diameter of the pole structure should comply with the installation dimensions of the clamp. Default
factory clamp is six inches for the column of φ130-152mm. It can work with the pole installation bracket.
You can adjust the diameter and the value (clamp specification) is : φ59-82mm、φ84-108mm、φ103-
127mm, φ130-152mm、φ155-178mm、φ180-203mm,φ194-216mm.
The clamp is shown as in Figure 7-2.
© Copyright Qvis® All documentation rights reserved.
Figure 7-1
Figure 7-2
21