Table of Contents
Advertisement
6 CORNER MOUNT BRACKET INSTALLATION
6.1 Component Installation
Corner mount bracket and its components are shown below. See Figure 6-1.
6.2 Installation
6.2.1 Installation Requirements
The corner mount for the speed dome can be installed onto the corner of a solidly constructed wall. Before the
installation, please make sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 4x weight of the speed dome.
6.2.2 Installation Steps
Draw 4 points, on to the installation wall, which line up with the holes of the corner installation accessories. See
Figure 6-2.
© Copyright Qvis® All documentation rights reserved.
Figure 6-1
Installation hole
Figure 6-2
19
Advertisement
Table of Contents
