Problems Related To Login Passwords; Forgotten Login User Password; Forgotten Password For Administrator Mode - Alaxala AX6700S Troubleshooting Manual

3 Troubleshooting Functional Failures During Operation

3.1 Problems related to login passwords

3.1.1 Forgotten login user password

If a user forgets his or her login user password and is unable to log in to the Switch, do the
following:
If another user can log in:
Ask the user who can log in to execute the
mode to reset the forgotten login user password. Alternatively, ask the user to use
the
Execute these commands in administrator mode. Therefore, the user who logs in
must know the password for the
administrator mode.
The following figure shows an example of resetting the forgotten password for
in administrator mode.
Figure 3-1 Example of resetting the password for user1
# password user1
Changing local password for user1.
New password:
Retype new password:
#
If no users can log in:
If no users can log in or if a user can log in but does not know the password for the
enable
perform a default restart. After startup due to the default restart, reset the password.
Take care when performing a default restart. A startup due to the default restart does
not perform authentication by password, authentication when changing to
administrator mode (
For details about default restarts, see the Configuration Guide.
The reset password takes effect after the Switch restarts.

3.1.2 Forgotten password for administrator mode

If you cannot change the input mode to administrator mode because you forgot the
password for the
seconds to perform a default restart. After startup due to the default restart, reset the
password.
Take care when performing a default restart. A startup due to the default restart does not
perform authentication by password, authentication when changing to administrator mode
( command), or command authorization.
enable
For details about default restarts, see the Configuration Guide.
The reset password takes effect after the Switch restarts.
26
command to delete the password.
clear password
command, push and hold the RESET button for at least five seconds to
enable
command, push and hold the RESET button for at least five
enable
password
command for changing the input mode to
enable
command), or command authorization.
command in administrator
user1