Led And Beeper Indications - Datalogic QuickScan QD2430 Quick Reference Manual

LED and Beeper Indications

The reader's beeper sounds and its top multi-colour LED illu-
minates to indicate various functions or errors on the reader.
An optional "Green Spot" also performs useful functions. The
following tables list these indications. One exception to the
behaviors listed in the tables is that the reader's functions are
programmable, and so may or may not be turned on. For ex-
ample, certain indications such as the power-up beep can be
disabled using programming bar code labels.
Indicator
Power-up Beep
Good Read
Beep
ROM Failure
Limited
Scanning Label
Read
Reader Active
Mode
Reader
Disabled
Quick Reference Guide
Description
The reader is in the
process of power-
ing-up.
A label has been
successfully
scanned by the
reader.
There is an error in
the reader's soft-
ware/programming
Indicates that a
host connection is
not established.
The reader is active
and ready to scan.
The reader has been
disabled by the
host.
LED and Beeper Indications
LED
LED behavior for
this indication is
configurable via
the feature "Good
Read: When to
Indicate"
(see the PRG for
information.)
Flashes
N/A
The LED is lit
a
steadily
The LED blinks
continuously
Beeper
Reader beeps four
times at highest
frequency and vol-
ume upon power-
up.
The reader will
beep once at cur-
rent frequency,
volume, mono/bi-
tonal setting and
duration upon a
successful label
scan.
Reader sounds one
error beep at high-
est volume.
Reader 'chirps' six
times at the high-
est frequency and
current volume.
N/A
N/A
27