Selecting The Interface Type; Interface Selection - Datalogic QuickScan QD2430 Quick Reference Manual

Selecting the Interface Type

A beam illuminates the label. The projected pattern of the
aiming system will be smaller when the reader is closer to the
bar code and larger when it is farther from the code. Symbol-
ogies with smaller bars or elements (mil size) should be read
closer to the unit. Symbologies with larger bars or elements
(mil size) should be read farther from the unit.
If the aiming system is centered you will get a good read. Suc-
cessful reading is signaled by an audible tone plus a good-read
green spot LED indicator.
Reference the QuickScan QD24XX Product Reference Guide
(PRG) on the Datalogic website for more information about
this feature and other programmable settings.
Selecting the Interface Type
Upon completing the physical connection between the reader
and its host, proceed directly to Interface Selection below for
information and programming for the interface type the read-
er is connected to (for example: RS-232, Keyboard Wedge,
USB, etc.) and scan the appropriate bar code to select your sys-
tem's correct interface type.

Interface Selection

The reader model will support one of the following sets of host
interfaces:
RS-232, RS-232 OPOS, USB, Key-
General Purpose Models:
board Wedge.
RS-232, RS-232 OPOS, USB.
Retail Point of Sale Models :
Information and programming options for each interface type
are provided in this section. For defaults and additional infor-
mation associated with each interface, proceed to the corre-
sponding chapter in the QuickScan QD2430 PRG.
8 QuickScan™ QD2430