Pick Mode; Multiple Label Reading - Datalogic QuickScan QD2430 Quick Reference Manual

General purpose corded handheld area imager bar code reader

Hide thumbs Also See for QuickScan QD2430:

Table of Contents

Pick Mode

Specifies the ability of the reader to decode labels only when

they are close to the center of the aiming pattern, which is the

area indicated by the two blue arrows. Pick Mode is a Decod-

ing and Transmission process where bar codes that are not

within the configurable distance from the center of the aiming

pattern are not acknowledged or transmitted to the host. It is

active only while the scanner is in Trigger Single mode. If the

scanner switches to a different Read Mode, Pick Mode is au-

tomatically disabled.

The reader offers a number of options for multiple label read-

ing. See the PRG or software configuration tool for descrip-

tions of these features and programming labels.

Quick Reference Guide

This feature is not compatible with Multiple Labels

Reading in a Volume. See the PRG for more infor-

mation.

ENTER/EXIT PROGRAMMING MODE

PIck Mode = Disable

Pick Mode = Enable

Operating Modes

Table of Contents

Show Quick Links

Table of Contents