Configuring The Interface - Datalogic QuickScan QD2430 Quick Reference Manual

Configuring the Interface

Scan the appropriate programming bar code to select the in-
terface type for your system.
RS-232
Quick Reference Guide
Unlike some other programming features and options,
interface selections require that you scan only one
programming bar code label. DO NOT scan an ENTER/
EXIT bar code prior to scanning an interface selection
bar code.
Some interfaces require the scanner to start in the dis-
abled state when powered up. If additional scanner
configuration is desired while in this state, pull the
trigger and hold for 5 seconds. The scanner will change
to a state that allows programming with bar codes.
RS-232 standard interface
Select RS232-STD
RS-232 Wincor-Nixdorf
Select RS232-WN
RS-232 for use with OPOS/UPOS/JavaPOS
Select RS-232 OPOS
Selecting the Interface Type
9