Selecting The Interface Type; Interface Selection - Datalogic QuickScan QBT2500 Quick Reference Manual

SELECTING THE INTERFACE TYPE

Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type supported by the reader and scan the appropriate
bar code to select your system's correct interface type,
according to your application.
For interfaces other than those listed in this manual, see
the QuickScan QBT/QM2500 Product Reference Guide
(PRG), available online at www.datalogic.com.

Interface Selection

The reader will support all the following host interfaces:
RS-232 STD
•
RS-232 WN
•
IBM46XX port 9b (a specific cable is required)
•
USB HID POS
•
USB Toshiba TEC
•
USB (Keyboard, COM, OEM)
•
USB Composite (Keyboard + COM)
•
Keyboard Wedge
•
Information and programming options for each interface
type are provided in this section. For defaults and additional
information associated with each interface, proceed to the
corresponding chapter in the QuickScan™ QBT/QM2500
PRG.
Selecting the Interface Type
QUICK REFERENCE GUIDE
15