Figure 41: Blind Transfer; Auto-Attended Transfer - Grandstream Networks GXV3240 User Manual

2. Select transfer mode as "Blind" by tapping on the highlight button in the figure below. The default
transfer mode is "Blind";
3. Enter the digits and then press the "Send" soft key on the right;
4. The call will be transferred and GXV3240 will hang up the call.
Note:
If wrong digits are entered, tap on
If users would like to cancel the transfer, press
screen.

AUTO-ATTENDED TRANSFER

The GXV3240 support auto attended transfer which provides users a fast and easy way to complete
attended transfer.
1. During the active call, press TRANSFER button
2. Select transfer mode as "Attended" by tapping on the mode selection bar (see figure below);
Firmware Version 1.0.3.6

Figure 41: Blind Transfer

to delete the digit one by one;
button to go back to the previous talking
to bring up the transfer screen;
GXV3240 User Guide Page 63 of 161