Call Transfer; Blind Transfer; Speed Dial; Figure 33: Blind Transfer - Grandstream Networks WP810 User Manual

Call Transfer

The WP810 supports the call transfer feature, you can transfer a call to another party using one of the
following ways:
▪ Blind transfer: Transfer a call directly to another party without consulting
▪ Attended transfer: Transfer a call with prior consulting.

Blind Transfer

1. Press "Transfer" softkey during a call, and then enter the number you want to transfer the call to.
2. Select Blind transfer by pressing on Blind key.
3. The call is connected to the number you specified, and the LCD screen prompts Call Transferred.

Speed Dial

Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly
useful to speed up dialing frequently used or hard to remember numbers. A maximum of 10 speed dial
numbers is allowed. For example, the digit key 2 is configured as a speed dial key and assigned the number
4000, the phone will dial out the number 4000 directly when you long press digit key 2.
Note: The speed dial number should not be set on chosen representative number, otherwise long press
will initiate a call to configured speed dial number.
To configure the speed dial (create, edit or delete) numbers, proceed as the following steps:
1. Press Menu to bring up operation menu and use arrow keys to reach Settings → Call Features
→ Speed dial.
2. Select the speed dial key to be configured and press "Select" softkey.
3. Select the associated account and the number to be dialed.
4. Press "Save" softkey to save the configured speed dial numbers.

Figure 33: Blind Transfer

WP810 User Guide
Version 1.0.1.1
P a g e | 57