Operation; Enclosure And Access; Pre-Start Checklist; Turning Off The Generator - Champion 100199 Operator's Manual

Model 100199

OPERATION

Before operating the generator, review SAFETY section starting
on page 5.

ENCLOSURE AND ACCESS

Open the enclosure to gain access to the generator and its
components. (Figure 10) Unlock the handles. Turn the handles
and lift the hoods up and to the outside.
20
Part No. 101048
Figure 10

PRE-START CHECKLIST

To make sure the generator is ready for proper operation, the
following items should be checked:
Fuel valve is in the ON position
No fault code LEDs are lit
Battery is at full charge
ATS control module is in the AUTO position
Engine control module is in the ATS position
Transfer switch lever is in the Utility Power position

TURNING OFF THE GENERATOR

If you need to shut off the generator when it is running, turn
the engine control module switch to the OFF position. This will
shut off the engine. With the engine control module in the OFF
position, the generator will not start, even if there is loss of utility
power.